Industrial Paint & Metal Coatings Perth
Industrial coatings for machinery, fabricated steel, structural metal frames, equipment and general metalwork. Explore BG Aqua DTM water-based coatings, Metal Mate quick-dry enamel systems and rapid-dry industrial finishes manufactured by BG Coatings in Perth.
Made for steel, machinery and fabricated metalwork
BG Industrial is about coating metal — from structural steel and building frames to machinery, plant, equipment and fabricated components. The correct coating route depends on the substrate, preparation, environment, drying requirements and finish.
Structural Steel & Frames
Coating systems for correctly prepared fabricated steel sections, building frames and structural metalwork.
Machinery
Industrial finishes for suitable prepared machinery, plant and fabricated equipment surfaces.
Fabrication
Primer and enamel options for workshop fabrication, metal components and steel assemblies.
Industrial Equipment
Fast-dry coating options for suitable equipment and general industrial metal applications.
Different metal jobs need different coating routes
BG Industrial includes water-based direct-to-metal technology as well as traditional single-pack quick-dry primer and enamel systems. Start with the metal, its condition and the required performance.
BG Aqua DTM 1490
Fast-drying water-based acrylic direct-to-metal coating for suitable interior and exterior metal applications in mild to moderate environments.
- 3-in-1 adhesion primer, anti-rust coating and topcoat
- Excellent adhesion
- Tough long-lasting barrier
- UV and weather resistant
- Low VOC
Metal Mate 1340 Zinc Phosphate Primer
Fast-drying industrial primer for correctly prepared mild steel, zinc-aluminium and galvanised steel.
- Excellent corrosion protection
- Strong UV resistance
- Fast drying and early recoat
- Good sandability
- Matt finish
BG Metal Mate 1K Enamel QD
BG’s single-pack quick-dry industrial enamel range, supported by Metal Mate primer products and offered across a broad range of product options.
- Single-pack industrial coating system
- Quick-dry technology
- Designed for industrial metal applications
- Use with the correct preparation route
- Multiple product options
Metal Mate 1490 Rapid Dry Enamel
General-purpose fast-drying high-gloss enamel with good adhesion for suitable exterior situations and industrial applications.
- Fast drying
- High-gloss enamel finish
- Good adhesion
- General industrial applications
- Suitable exterior use where specified
BG Industrial Multi Purpose Thinner
BG specifies its multipurpose thinner with applicable Metal Mate products. Always follow the current product TDS for thinning, cleaning and dilution guidance.
Industrial coating performance starts before the topcoat
Steel preparation, contamination, existing coatings and corrosion all affect the coating route. Always match preparation and application to the current BG technical data for the selected product.
Identify the metal and existing condition
The correct preparation route depends on whether the job involves bare steel, galvanised metal, zinc-aluminium, previously coated metal or fabricated components.
- Mild steel
- Galvanised steel
- Zinc-aluminium steel
- Previously painted metal
- Fabricated structural sections
Inspect and clean
Remove grease, contamination, loose coatings, rust and other material as required by the current product instructions.
Prepare the steel
Mechanical preparation, sanding or other preparation may be required depending on the substrate and coating condition.
Select DTM or primer + enamel
Aqua DTM provides a direct-to-metal route, while Metal Mate uses dedicated primer and compatible enamel options where specified.
Follow the TDS
Application method, thinner, recoat time and environmental limits vary by product. Use the current BG TDS before application.
Primer, direct-to-metal and enamel options
Choose between a convenient water-based direct-to-metal route and dedicated quick-dry primer and enamel systems.
Aqua DTM 1490
Primer, anti-rust protection and topcoat combined in one water-based coating.
- Technology
- Acrylic DTM
- VOC
- Low VOC
- Use
- Interior / exterior metal
Metal Mate 1340
Zinc-phosphate primer for suitable prepared steel and industrial metal surfaces.
- Finish
- Matt
- Colours
- Dark Grey / Red Oxide
- Role
- Corrosion protection
Metal Mate 1K Enamel QD
Single-pack quick-dry enamel system for suitable industrial metal applications.
- System
- Single pack
- Drying
- Quick dry
- Use
- Industrial metalwork
Metal Mate 1490
General-purpose fast-drying high-gloss enamel for suitable industrial metal applications.
- Finish
- High gloss
- Drying
- Rapid dry
- Use
- General industrial
Industrial coatings backed by a Perth paint manufacturer
BG Coatings manufactures and supplies coating systems from Malaga, Western Australia, with technical documentation and direct product support available to customers.
Australian Manufacturer
Industrial coatings manufactured and supplied by BG Coatings in Perth.
Multiple Coating Routes
Choose water-based direct-to-metal technology or traditional primer and enamel systems.
Technical Information
Product data and safety information are available through the BG TDS/SDS library.
Factory Support
Speak with BG Coatings when substrate, previous coating or application requirements are uncertain.
Need the right industrial coating route?
Start with the metal and required finish. Browse the industrial category or contact BG Coatings when the substrate or existing coating needs to be identified first.
BG Industrial Paint FAQ
Quick answers for fabricators, workshops, trades and industrial users choosing a BG coating system.
What is BG Industrial paint used for?
What is BG Aqua DTM?
What is Metal Mate 1340 primer used for?
What is Metal Mate 1490 Rapid Dry Enamel?
Should I use Aqua DTM or a primer and enamel system?
Can BG Industrial coatings be used on building metal frames?
Where can I find the technical data sheets?
Can I buy BG Industrial paint directly?
Choose the right BG Industrial system for your project
Browse Aqua DTM, Metal Mate quick-dry enamel and Rapid Dry products, or contact BG Coatings when you need help identifying the correct coating route.